search

ATEN 8-Channel Relay Expansion Box (VK248)

Provides 8 relay channels to expand the ATEN Control System

ID Switch pairs the VK248 with a controller to instantly configure the network settings

Up to eight VK248 expansion boxes can be added to a single Control Box

Supports Power over Ethernet (PoE) or DC power supply

  Security policy

Guaranteed Original

  Delivery policy

We accept deliveries nationwide through partner couriers

  Warranty Policy

1 to 3 years Limited Hardware Warranty

Interfaces
Relay • 8 normally open relays (8 x 2-pole terminal block)
• Contact Rating: Max 24 VDC, 2A
Ethernet • 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID 1 x 16-segment Switch
Expander ID 1 x 8-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
USB 1 x USB Type A (Firmware upgrade only)
Power Consumption DC5V:2.82W:24BTU
DC48V:3.53W:27BTU
Environmental
Operating Temperature 0 – 50°C
Storage Temperature –20 – 60°C
Humidity 0 - 80% RH, Non-Condensing
Power
Output 12 VDC, 300 mA
Physical Properties
Housing Metal
Weight 0.65 kg ( 1.43 lb )
Dimensions (L x W x H) 20.00 x 7.58 x 4.20 cm
(7.87 x 2.98 x 1.65 in.)
chat Comments (0)