search

ATEN Control System 12-button Control Pad [EU, 2 Gang] (VK0200)

Fully-customizable 12-button Control Pad that integrates a controller with a keypad

Supports various control interface connections: 2x RS-232 ports, 2x relay channels, 1x digital input, and 1x Ethernet port

125 layout combinations of 6 to 12 buttons

Available in black or white color

  Security policy

Guaranteed Original

  Delivery policy

We accept deliveries nationwide through partner couriers

  Warranty Policy

1 to 3 years Limited Hardware Warranty

Interfaces
Keypad Layout 6~12 buttons customizable in 125 keypad layouts
Serial • 2 x Bi-directional RS-232 Port
(2 x 3-Pole Terminal Block Connector);
 – Baud Rate: 300 to 115200 (default: 9600);
 – Data Bit: 8 (default) or 7;
 – Stop Bit: 1 (default) or 2;
 – Parity: None (default), even or odd
Relay • 2 x Relay Channel (2 x 2-Pole Terminal Block Connector);
• Normally open, isolated Relays;
• Contact Rating: Max 24 VDC, 1A
I/O • 1 x Digital Input Channel
(1 x 2-Pole Terminal Block Connector);
 – VDC Mode
Input Voltage Range: 0 to 5 VDC;
Programmable Range: 1 to 5 VDC;
 – Dry Contact Mode
Pull-up 2k ohms to + 5 VDC
Ethernet • 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID 1 x 16-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
Power Consumption DC5V:1.15W:5BTU
POE:1.44W:7BTU
Environmental
Operating Temperature 0 – 50°C
Storage Temperature –20 – 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Plastic
Weight 0.19 kg ( 0.42 lb )
Dimensions (L x W x H) 8.32 x 14.76 x 4.80 cm
(3.28 x 5.81 x 1.89 in.)
chat Comments (0)